Ducky 13

Sailing inflatable catamaran Ducky13

Ducky13 – the smallest in the Ducky catamaran family.

The smallest model in Ducky family designed both for the young and adult wishing to get acquainted with fascinating world of sails.

It is ideal “toy” for active recreation on the water, absolutely safe even under minimal handling skills.

At development this catamaran we have paid special attention to its construction which has possible minimum of assembly details, and in turn this reduce assembling time of catamaran until 20-30 minutes without tool using!

No ropes. Free standing mast excludes the probability of catamaran overturning under strong wind . The sheet is let off and the sail sets as a weather-vane on its own.

As you are tired to ride or feel like to sunbathe you can get the must out of the socket in few seconds and turn catamaran into soft cot. Trampoline – 1,8 x 1,8 mWhen disassembled and packed for transportation Ducky13 represents one 1,8m long pack of 10 tube elements and another one with floats, rudder, centerboard and sail.

Technical data of Ducky13

Length (m)3.9
Width (m)1.9
Diameter of floats (m)0.42
Main sail area (sq.m)5
Length \ Width of trampoline (m)1.8 / 1.8
Carrying capacity (kg)200
Weight (kg)35
Dimensions in packed condition (m):
Pack №1
Pack №2
 
1.8 х 0.25 х 0.25
0.8 х 0.4 х 0.3
Time of Assembly \ Disassembly (min)25 / 15
Recommended engine power (hp)2.2
Boat design category (Directives 94/25/EC and 2003/44/EC)D

 


As an extension an outboard engine of 2.2 PS capacity can be mounted on special transom board braced to stern seat.

In the production of our catamarans, we use only high-quality materials and components from the world’s leading manufacturers. The frame, mast and connectors are made of aluminum alloy, which has high strength and lightness, and also has high corrosion resistance in sea water. For additional protection against corrosion, all parts are anodized. Сenterboard and rudder of fiberglass reinforced plastic. Sail made of Dimension-Polyant dacron (170 g/m2) or mylar. All fastening elements are made of stainless steel. Hulls of two sections made out of Valmex, special PVC boat fabric (1000 g/sq.m).

gleistein_logo K-Sails_Logo lanex-logo liros Polyant Sprenger Valmex