Twist of the position of the hulls to each other

touring
KlabauterR
Posts:19
Joined:Mon Aug 18, 2014 4:29 pm
Re: Twist of the position of the hulls to each other

Post by KlabauterR » Sat Nov 29, 2014 8:43 am

Thanks,

is a picture available how it is done on new Ducky 19 R?

Ralph
User avatar
Vitaliy
Posts:389
Joined:Wed Nov 29, 2006 9:02 am
Location:Ukraine, Kyiv
Contact:

Re: Twist of the position of the hulls to each other

Post by Vitaliy » Tue Dec 02, 2014 2:55 pm

This photo?
Attachments
DSC_6817_1.jpg
DSC_6817_1.jpg (200.68KiB)Viewed 5070 times
Sailing inflatable catamarans Ducky
www.ducky.com.ua
KlabauterR
Posts:19
Joined:Mon Aug 18, 2014 4:29 pm

Re: Twist of the position of the hulls to each other

Post by KlabauterR » Tue Dec 02, 2014 9:35 pm

Yes, thank you very much. That is what I wanted to see. I shall change it in the same way.

I see the turnbuckles stay down near the centerboard box. That is what I had expected. But Emayd advised:

"Both tornbuckles should be placed on corners of first trampoline, and cables connected to centerboard box."

What might be the reason?

Ralph
User avatar
Vitaliy
Posts:389
Joined:Wed Nov 29, 2006 9:02 am
Location:Ukraine, Kyiv
Contact:

Re: Twist of the position of the hulls to each other

Post by Vitaliy » Wed Dec 03, 2014 7:38 pm

I think that so he wanted to lift them above and to secure against possible damage or untwisting. That they were better visible. But such option demands an additional "soft" link. As option, it is possible to do and so. :)
Sailing inflatable catamarans Ducky
www.ducky.com.ua
KlabauterR
Posts:19
Joined:Mon Aug 18, 2014 4:29 pm

Re: Twist of the position of the hulls to each other

Post by KlabauterR » Mon Dec 08, 2014 3:16 pm

Hello Vitaliy,

would this special spare part fom the Ducky 19 also fit to my Ducky 17 when I change to two turn buckles?

To Ducky 17: The thread for the centerboardbox is 2,8 cm wide and for 0,8 cm diameter bolts.

Could I order the part?

yours sincerely
Ralph
Attachments
DSC_6817_1.jpg
DSC_6817_1.jpg (189.41KiB)Viewed 5046 times
Last edited by KlabauterR on Tue Dec 09, 2014 9:39 am, edited 1 time in total.
User avatar
Vitaliy
Posts:389
Joined:Wed Nov 29, 2006 9:02 am
Location:Ukraine, Kyiv
Contact:

Re: Twist of the position of the hulls to each other

Post by Vitaliy » Mon Dec 08, 2014 4:04 pm

Such details for Ducky17 aren't provided. You can finish this detail independently.
Sailing inflatable catamarans Ducky
www.ducky.com.ua
KlabauterR
Posts:19
Joined:Mon Aug 18, 2014 4:29 pm

Re: Twist of the position of the hulls to each other

Post by KlabauterR » Wed Feb 25, 2015 2:54 pm

Hello,

just finished! Handmade based on the original sparepart.
Total weight as shown on the picture nearly 500 g!
And quite expensive too.

Ralph
Attachments
DSCN1678klein.jpg
Post Reply